MEP (Mechanical Electrical & Plumbing)
Better Builds: Future-Proofing Your Project with Smart MEP Solutions.
MEP: The Unseen Engine of Your Building’s Success.
Mechanical, Electrical, Plumbing, and Fire Safety (MEP) systems are the lifeblood of any modern building, profoundly impacting its operational efficiency, occupant comfort, safety, and long-term sustainability. Sub-optimal MEP design or installation can lead to excessive energy use, frequent system failures, safety non-compliance, and significantly higher operational costs.
At Better Builds, we deliver intelligent and seamlessly integrated MEP systems tailored for Delhi & NCR’s dynamic construction landscape. Our expert engineers focus on innovative, energy-efficient solutions, strict adherence to NBC codes, and leveraging advanced technology to ensure your building operates at its best, today and tomorrow.
Intelligent MEP Systems: Integration for Peak Performance
Better Builds delivers fully integrated Mechanical, Electrical, Plumbing, and Fire Safety (MEP) systems, engineered for optimal performance, sustainability, and safety in your Delhi & NCR projects.
We design and install intelligent electrical and low voltage infrastructure, focusing on energy efficiency, safety, and future-readiness for your building.
-
Energy-Efficient Electrical Design & Load Management:
- Comprehensive electrical schematics, load calculations, fault level analysis, and strategic load distribution for optimal energy use.
- Liaison with DISCOMs for load application, sanction, and ongoing management.
- Design and installation of HT/LT substations, transformers, and associated outdoor/indoor VCBs, switchgear.
-
Complete Wiring, Conduiting & Panel Installations:
- Precision concealed and surface conduiting (MS, GI, PVC, HDPE) for all electrical wiring, including in-slab (casting) and chase-cut wall conduiting.
- Wiring for power and lighting circuits using FRLS-HR/ZHFR/Armoured cables of appropriate sizing.
- Installation of Main LT Panels, Sub-Distribution Boards (SDBs), Final Distribution Boards (DBs) with MCBs/MCCBs/ELCBs/RCBOs, Meter Boards, Rising Mains, and Busbar trunking (BBT) systems.
- Installation of modular switches, sockets, industrial sockets, and various electrical fixtures.
-
Integrated Low Voltage & Communication Systems:
- Structured cabling (CAT6/6A, Fiber Optic) for robust data networks, telephony (EPABX), and intercom systems.
- MATV/IPTV system cabling and head-end installations.
- CCTV, Access Control, Intrusion Alarm, and other ELV security system cabling & conduit provisioning.
- Interior, Exterior, Facade & Landscape Lighting
-
Lightning Protection & Advanced Earthing Systems:
- Design and installation of Conventional Air Terminals/ESE Lightning Protection Systems as per IS/IEC 62305.
- Installation of dedicated, low-impedance earthing systems (pipe, plate, chemical, strip) for safety, power quality, and sensitive equipment (e.g., IT, medical) as per IS 3043, including foundation earthing.
- Installation of Surge Protection Devices (SPDs) at various distribution levels.
-
Renewable Energy & EV Charging Solutions:
- Grid-tied/Off-grid solar power plant design, installation, and integration.
- Comprehensive Electric Vehicle (EV) charging infrastructure, including individual and common charging stations.
-
Cable Management & Structural Integration:
- Installation of cable trays, cable ladders, trunking, and underground cable duct banks/trenches.
- Coordination for pipe sleeves, cutouts, and recessed provisions in structural elements.
Our sustainable plumbing and water management systems are meticulously designed and installed for optimal hygiene, water efficiency, and long-term reliability, adhering to NBC and public health engineering standards.
-
Efficient Water Supply Systems (Internal & External):
- Design and installation of hot/cold water distribution networks using high-quality piping materials (CPVC, UPVC, PPR, Composite, GI) with necessary insulation.
- Installation of hydro-pneumatic (pressure boosting) systems, break pressure tanks, and domestic/flush water meters.
- Underground and overhead water tank design review and connection works.
-
Sanitary Systems & Fixture Installation:
- Precision installation of all types of modern sanitary ware (WCs, washbasins, urinals, bathtubs, EWC) and CP fittings.
- Expertise in concealed plumbing for all fixtures, including concealed flush systems (cisterns/tanks/valves), wall-hung WCs, and sensor-based/contactless fixtures.
- Standardized heights and layouts for all fittings in bathrooms, WCs, and kitchens.
-
Advanced Drainage & Waste Management (Internal & External):
- Design and installation of internal and external drainage systems (soil, waste, vent, rainwater) using SWR/UPVC/HDPE pipes with correct slopes and venting.
- Installation of floor traps, nahani traps, grease traps, gully traps, inspection chambers, and manholes.
- Testing of all drainage lines for leaks and proper flow.
-
Water Treatment & Recycling Systems:
- Selection, installation, and automation of various pumps (booster, submersible, dewatering, sewage, fire).
- Comprehensive hydro-testing of all water supply and pressure plumbing lines for system integrity.
-
Pumping Systems & Hydro-Testing:
- Selection, installation, and automation of various pumps (booster, submersible, dewatering, sewage, fire).
- Comprehensive hydro-testing of all water supply and pressure plumbing lines for system integrity.
We engineer optimal indoor environments through energy-efficient HVAC solutions and advanced air quality management systems, focusing on occupant comfort, health, and operational cost savings.
-
Energy-Efficient HVAC System Design & Installation:
- Centralized systems (Water/Air-cooled Chillers, AHUs, Cooling Towers) and decentralized systems (VRV/VRF, Ducted/Non-Ducted Splits, Packaged Units) tailored to project load and energy goals.
- Precision installation of all HVAC equipment including piping, valves, and plant room accessories.
-
Indoor Air Quality (IAQ) & Ventilation Systems:
- Mechanical ventilation systems for basements, car parks, common areas, and specialized industrial applications.
- Fresh air systems, heat recovery ventilators (HRVs), energy recovery ventilators (ERVs), and advanced filtration solutions (HEPA, ULPA).
- Humidity control systems and IAQ monitoring solutions.
-
Smoke Management & Specialized Ventilation:
- Engineered smoke extraction, staircase pressurization, and zone pressurization systems for life safety in case of fire.
- Kitchen exhaust systems, laboratory ventilation, and other specialized ventilation.
-
Custom Ducting, Piping & Air Distribution:
- Design, fabrication, and installation of efficient air distribution networks using GI/PIR/Fabric ducting with appropriate insulation and acoustic lining.
- Installation of grilles, diffusers, VAVs (Variable Air Volume units), and other air terminal devices.
- Chilled water piping, condenser water piping, and refrigerant piping with necessary insulation and supports.
-
System Balancing, Controls & Commissioning:
- Comprehensive air and water balancing (TAB - Testing, Adjusting, Balancing) for optimal system performance.
- Installation and integration of Building Management Systems (BMS) for HVAC control and monitoring.
- Thorough testing and commissioning to ensure design parameters are met and energy efficiency is maximized.
Ensuring the highest standards of life and asset protection with our comprehensive fire safety and life support systems, fully compliant with NBC, local fire authority norms, and relevant IS codes.
-
Fire Detection, Alarm & Evacuation Systems:
- Design and installation of Addressable/Conventional fire alarm systems, including intelligent smoke/heat/multi-sensor detectors, manual call points, and advanced annunciation panels. [cite: 221]
- Integrated Public Address and Voice Evacuation (PAVA) systems for clear emergency communication.
- Emergency and exit lighting systems ensuring illuminated escape routes.
-
Automated Fire Suppression Systems:
- Water-Based: Wet riser, downcomer, yard hydrant systems; automatic sprinkler systems (wet pipe, dry pipe, pre-action, deluge).
- Gas-Based Suppression: For server rooms, data centers, electrical rooms, and critical equipment (e.g., Novec 1230, FM200, CO2, Inert Gas).
- Foam-Based Suppression: For flammable liquid storage and handling areas.
-
Fire Pumps, Water Storage & Hydrant Accessories:
- Design and installation of dedicated fire pump sets (main electric, main diesel, standby, jockey) and fire water tanks (underground/overhead) as per relevant standards.
- Installation of hydrant valves, hoses, nozzles, and other accessories.
-
Passive Fire Protection Measures:
- Application of fire-rated sealants for electrical/mechanical service penetrations through fire-rated walls/floors.
- Installation of firestop barriers, fire-rated coatings for cables and structural steel.
- Installation of certified fire-rated doors, dampers, and partitions to maintain compartmentation.
-
Liaison, Approvals & Fire NOC:
- Coordination and liaison with local fire authorities for drawing approvals, stage-wise inspections, and obtaining final Fire Safety Certificate/NOC.
Upholding engineering integrity through rigorous quality management, safety protocols, and diligent project oversight.
- Material Testing & Certification: Source verification, incoming material inspection, and third-party/in-house testing of cement, aggregates, steel, concrete (cube testing, slump tests) as per IS codes and project specifications.
- Stage-Wise Quality Checks & Documentation: Checklists, inspection requests (IRs), non-conformance reports (NCRs), and detailed records for all critical activities. Adherence to approved Method Statements.
- Health, Safety & Environment (HSE) Management: Implementation of a robust site safety plan, regular safety drills, use of PPE, and environmentally conscious construction practices.
- Strict IS Code & NBC Adherence: Ensuring all design and construction activities conform to the latest revisions of relevant Indian Standards (e.g., IS 456, IS 13920) and the National Building Code.
- Coordination & Reporting: Seamless coordination with design consultants, architects, and other stakeholders. Regular progress reporting and proactive issue resolution.
The Better Builds MEP Edge: Our Core Principles in Action
Our approach to MEP systems is built on a foundation of deep engineering expertise, proactive project management, and a commitment to delivering solutions that are not only compliant but also optimized for performance, sustainability, and your specific project goals in Delhi & NCR.
Principle 1: Integrated Design & BIM-Enabled Coordination
We champion a holistic, integrated approach from the outset. Our teams utilize BIM (Building Information Modeling) where applicable for clash detection, precise services routing, and seamless coordination between mechanical, electrical, plumbing, and fire safety systems, as well as with civil and architectural plans. This minimizes conflicts, optimizes space, and ensures smoother execution.
Principle 2: Energy Efficiency & Sustainable Solutions
Sustainability and energy efficiency are at the heart of our MEP designs. We specify energy-efficient equipment, design systems for optimal performance (e.g., right-sized HVAC, efficient lighting, water-saving plumbing), and incorporate renewable energy solutions where feasible. Our goal is to reduce your building’s operational costs and environmental footprint.
Principle 3: Strict Adherence to Codes & Safety Standards
We operate with an absolute commitment to safety and full compliance with the National Building Code (NBC), relevant Indian Standards (IS), CEA regulations, and local statutory requirements in Delhi & NCR. From design reviews to material selection and installation practices, every step is governed by stringent safety protocols and quality assurance.
Principle 4: Technology-Driven & Future-Ready Installations
We embrace proven and emerging technologies to deliver MEP systems that are not only robust and reliable but also smart and adaptable for future needs. This includes smart building controls (BMS integration), IoT-ready components, and scalable designs that can accommodate future technological advancements or changes in building use.